Cisco Pagent Example configuration

Cisco IOS Software, 3800 Software (C3845-TPGEN+IPBASE-M), Experimental Version 12.4(20100323:103320) [shgautam-v48-reg 116]
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 23-Mar-10 17:31 by shgautam

ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

Pagent uptime is 5 days, 13 hours, 9 minutes
System returned to ROM by power-on
System image file is “flash:c3845-tpgen_ipbase-mz.PAGENT.4.8.0”

Cisco 3845 (revision 1.0) with 225280K/36864K bytes of memory.
Processor board ID SEEERIALLLLL
2 Gigabit Ethernet interfaces
DRAM configuration is 64 bits wide with parity enabled.
479K bytes of NVRAM.
126976K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

gigabitEthernet0/1  <– Select Output interface
rate 40000
length random 1000 to 1514
repeat 100 no-update
length random 500 to 1514
L2-encapsulation arpa
L2-dest-addr CCCC.3905.AAAA <– mac-address of SUT (manual config)
L2-src-addr BBBB.185B.DDDD <– mac-address of interface g0/1 (auto)
L3-src-addr random to
L3-dest-addr random to
L3-ttl 254
L4-type 8
data-length 1514
fill-pattern random with-update


Show command:

Pagent(TGN:ON,Gi0/1:10/10)#sh icmp

Pagent(TGN:ON,Gi0/1:10/10)#sh rate

Pagent(TGN:ON,Gi0/1:10/10)#sh ip