Hand on: Configuring Cisco EHWIC 3G Module

Hand on: Configuring Cisco EHWIC and 880G for 3.7G (HSPA+)/3.5G (HSPA)
Cisco 3G HSPA+R7 Config

================================================================================
!
! Configuring Cisco EHWIC and 880G for 3.7G (HSPA+)/3.5G (HSPA)
! – Cisco 1921
! – 3G EHWIC-QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS
! – Test send SMS: cellular 0/0/0 gsm sms send “Test Message from Cisco Router”
!
!================================================================================

Router#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.3(1)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 25-Mar-13 08:15 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)

Router uptime is 25 minutes
System returned to ROM by reload at 12:46:13 UTC Thu Aug 15 2013
System image file is “usbflash0:c1900-universalk9-mz.SPA.153-1.T1.bin”
Last reload type: Normal Reload
Last reload reason: Reload Command

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.
Processor board ID FGL171922UM
2 Gigabit Ethernet interfaces
3 terminal lines
1 Virtual Private Network (VPN) Module
2 Cellular interfaces
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
249840K bytes of USB Flash usbflash0 (Read/Write)

License Info:

License UDI:

————————————————-
Device# PID SN
————————————————-
*0 CISCO1921/K9 FGL171922UM

Technology Package License Information for Module:’c1900′

—————————————————————–
Technology Technology-package Technology-package
Current Type Next reboot
——————————————————————
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data datak9 Permanent datak9

Configuration register is 0x2102

================================================================================
!
! Configuration Guide
!
!================================================================================

Router#sh run
Building configuration…

Current configuration : 2105 bytes
!
! Last configuration change at 13:06:00 UTC Thu Aug 15 2013 by admin
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no logging console
enable password admin
!
no aaa new-model
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
ip name-server 8.8.8.8
ip inspect WAAS flush-timeout 10
no ipv6 cef
!
multilink bundle-name authenticated
!
chat-script hspa-R7 “” “AT!SCACT=1,1” TIMEOUT 60 “OK”
chat-script 3G “” “AT!SCACT=1,1” TIMEOUT 120 “OK”
!
!
license udi pid CISCO1921/K9 sn XXXXXXXXXXX
!
!
username admin password 0 admin
!
redundancy
notification-timer 60000
!
!
!
!
!
controller Cellular 0/0
!
!
!
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Cellular0/0/0
ip address negotiated
ip virtual-reassembly in
encapsulation slip
dialer in-band
dialer idle-timeout 0
dialer string hspa-R7
dialer string 3G
dialer-group 1
async mode interactive
!
interface Cellular0/0/1
no ip address
encapsulation slip
!
interface Dialer1
no ip address
encapsulation ppp
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 Cellular0/0/0
!
dialer-list 1 protocol ip permit
!
!
!
control-plane
!
!
!
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 0/0/0
exec-timeout 0 0
script dialer 3G
login
modem always-on
modem InOut
no exec
transport input all
rxspeed 21600000
txspeed 5760000
line 0/0/1
no exec
line vty 0 4
login local
transport input all
!
scheduler allocate 20000 1000
!
end

!================================================================================
! Create profile number 1 (relate chat-script AT!SCACT=1,)
! APN: internet
! Username: true
! Password: true

Router#cellular 0/0/0 gsm profile create 1 internet chap true true
Router#sh cellular 0/0/0 profile
Profile 1 = INACTIVE*
——–
PDP Type = IPv4
Access Point Name (APN) = internet
Authentication = CHAP
Username: true
Password: true

* – Default profile
Router#ping 8.8.8.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
….!
Success rate is 20 percent (1/5), round-trip min/avg/max = 212/212/212 ms

================================================================================
!
! Verify
!
!================================================================================
Router#sh int cellular 0/0/0
Cellular0/0/0 is up, line protocol is up
Hardware is QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS
Internet address is 10.195.161.249/32
MTU 1500 bytes, BW 5760 Kbit/sec, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SLIP, loopback not set
Keepalive not supported
Last input 00:02:36, output never, output hang never
Last clearing of “show interface” counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 1
Queueing strategy: fifo
Output queue: 0/10 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
145 packets input, 14657 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
457 packets output, 35996 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up

Router#sh cellular 0/0/0 profile
Profile 1 = ACTIVE*
——–
PDP Type = IPv4
PDP address = 10.195.161.249
Access Point Name (APN) = internet
Authentication = CHAP
Username: true
Password: true
Primary DNS address = 61.91.211.78
Secondary DNS address = 119.46.78.98

* – Default profile

Router#sh cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 520002002965633
International Mobile Equipment Identity (IMEI) = 357115040626256
Integrated Circuit Card ID (ICCID) = 8966004011909750439
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3001302091007
Modem Status = Online
Current Modem Temperature = 44 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2

Profile Information
====================
Profile 1 = ACTIVE*
——–
PDP Type = IPv4
PDP address = 10.195.161.249
Access Point Name (APN) = internet
Authentication = CHAP
Username: true
Password: true
Primary DNS address = 61.91.211.78
Secondary DNS address = 119.46.78.98

* – Default profile

Data Connection Information
===========================
Data Transmitted = 16564 bytes, Received = 11684 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = 10.195.161.249
Primary DNS address = 61.91.211.78
Secondary DNS address = 119.46.78.98
Negotiated QOS Parameters:
Precedence = High Priority, Delay = Class 1
Reliability = Unack GTP, LLC, Ack RLC, Protected data
Peak = 256 kB/sec, Mean = 50000 kB/hr
Traffic Class = Interactive
Uplink Max = 11.5Mbps, Guaranteed = Subscribed
Downlink Max = 42Mbps, Guaranteed = Subscribed
Max SDU size = 1500 bytes
SDU error ratio = 1E-4, BER = 4E-3
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state

Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = HSPA+ (Attached)
Packet Session Status = Active
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = THA, Network =
Mobile Country Code (MCC) = 520
Mobile Network Code (MNC) = 0
Location Area Code (LAC) = 17
Routing Area Code (RAC) = 35
Cell ID = 26470
Primary Scrambling Code = 441
PLMN Selection = Automatic
Registered PLMN = , Abbreviated =
Service Provider = TRUE-H

Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 850, Channel Number = 4408
Current RSSI = -100 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x1B9
RSCP = -99 dBm, ECIO = -6 dBm

Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3

GPS Information
==========================

GPS Info
————-
GPS State: GPS disabled

SMS Information
===============
Incoming Message Information
—————————-
SMS stored in modem = 2
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 30
Storage records used = 3
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0

Outgoing Message Information
—————————-
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status = 0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
Reference Number = 0
Result Code = 0x0
Diag Code = 0x0 0x0 0x0 0x0 0x0

SMS Archive URL =

Error Information
=================

Cached info is displayed

at!err

QDSP6 ARM9 (not saved)
00 22 uim 08480 00 01 hsu_conf_sel_nv 00572
01 3A gsnvif 00245 01 01 hsu_conf_sel_nv 00616
02 FF cmtask 01162 02 01 timer 03552
03 22 mmglbl 00392
04 22 gsnvif 00478
05 22 rr_init 01597
06 22 rr_init 01601
07 22 rrcdata 08026
08 01 gmmutil 01099
09 01 gmmutil 01118
10 01 gmmutil 01141
11 01 gmmutil 01156
12 01 gmmutil 01174
13 01 gmmutil 01198
14 1A rrcllcp 16550
15 02 rrccspf 02198
16 41 rrccsp 20686
17 11 gsdi 09787
18 01 gsdi_co 01538
19 22 cnlbs 03307

OK

at!gcdump

No crash data available

OK

Modem Crashdump Information
===========================
Modem crashdump logging: off

================================================================================
!
! Troubleshooting
!
!================================================================================

debug chat
debug dialer
Router(config)#no logging console
Router(config)#logging buffer
Router(config)#service internal
Router#test cellular 0/0/0 modem-power-cycle
Router#show log

Router#sh diag 0
Slot 0:
C1921 Mother board 2GE, integrated VPN and 2W Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time 00:38:13 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC17168M58
Hardware Revision : 1.0
Part Number : 73-12850-08
Top Assy. Part Number : 800-33408-04
Board Revision : A0
Deviation Number : 130603
Fab Version : 02
Product (FRU) Number : CISCO1921/K9
Version Identifier : V05
CLEI Code : CMMHF10ARA
Processor type : C8
Chassis Serial Number : FGL171922UM
Chassis MAC Address : bc16.653f.65e0
MAC Address block size : 32
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 37 31 36 38 4D 35 38 40
0x10: 06 AC 41 01 00 82 49 32 32 08 C0 46 03 20 00 82
0x20: 80 04 42 41 30 88 00 01 FE 2B 02 02 CB 8C 43 49
0x30: 53 43 4F 31 39 32 31 2F 4B 39 89 56 30 35 20 D9
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 48 46 31 30 41 52
0x50: 41 09 C8 C2 8B 46 47 4C 31 37 31 39 32 32 55 4D
0x60: C3 06 BC 16 65 3F 65 E0 43 00 20 C4 08 00 00 00
0x70: 00 00 00 00 00 F3 00 51 40 00 8B 41 00 3C 42 00
0x80: 00 F8 00 24 03 E8 1B 11 07 D0 1E A2 09 C4 1F A9
0x90: 0B B8 20 0F 0F A0 20 D3 13 88 21 6A 1B 58 21 A9
0xA0: 1F 40 21 B8 27 10 21 3E 41 00 50 42 00 00 F8 00
0xB0: 18 02 71 1D B0 04 E2 20 08 07 53 21 02 0E A6 22
0xC0: 60 1D 4C 22 C4 27 10 22 C4 FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:
3G EHWIC-QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS
PCB Serial Number : FOC171048EC
Hardware Revision : 1.0
Part Number : 73-12970-01
Top Assy. Part Number : 800-33679-01
Board Revision : A0
Deviation Number : 0
Fab Version : 01
Product (FRU) Number : EHWIC-3G-HSPA+7
Version Identifier : V01
CLEI Code : COUIA9ACAA
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 37 31 30 34 38 45 43 40
0x10: 06 C3 41 01 00 82 49 32 AA 01 C0 46 03 20 00 83
0x20: 8F 01 42 41 30 88 00 00 00 00 02 01 CB 8F 45 48
0x30: 57 49 43 2D 33 47 2D 48 53 50 41 2B 37 89 56 30
0x40: 31 20 D9 03 40 C1 CB C6 8A 43 4F 55 49 41 39 41
0x50: 43 41 41 C4 08 00 00 00 00 00 00 00 00 C5 08 00
0x60: 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Embedded Service Engine 0/0 :
Total platform memory : 524288K bytes
Total 2nd core memory : 0K bytes
Start of physical address for 2nd core : 0x80000000
Virtual address start of 2nd core memory : 0x0 – 0x0
2nd core configured disabled
L2 cache ways for 2nd core : 0

Router#sh controllers cellular 0/0/0

Interface Cellular0/0/0
QuadBand HSPA+R7/HSPA/UMTS QuadBand EDGE/GPRS and GPS unit 0,
HWIC cellular modem configuration:
—————————

Modem is recognized as valid for this HWIC
manufacture id: 0x00001199 product id: 0x000068A3
Sierra Wireless MC8705 HSPA+R7 modem.
Modem Uplink Speed = 5760 kbit.
Modem Downlink Speed = 21600 kbit.

GPS State: GPS disabled

Modem Management Statistics
—————————
Modem resets = 4
Last known modem state = ‘application’ mode
Packets sent = 467, Packets received = 2478, Packets pending = 0
DIP MDM link status retry count = 0 pdp context = 0
DIP MDM link up pending = 0 pdp context = 0
DIP MDM link status retry count = 0 pdp context = 1
DIP MDM link up pending = 0 pdp context = 1
IDB Cellular0/0/0: DIP profile id = 1
IDB Cellular0/0/1: DIP profile id = 255
RSSI LED = OFF
UMTS/HSPA LED = ON
HSPA+R7 LED = ON
GPS LED = OFF
GPS NMEA port = Disabled (Stream OFF)
DM port = Disabled

Nios registers:
—————–
Nios reset register = 0x9454B
Nios PC Trace Buffer Pointer register = 0x22B8
PLL1 = Locked PLL2 = Locked PLL3 = Locked

HWIC Register Base: 0x10000000
——————
HWIC Common Registers:
———————
id(0x00): 0x00000001 rev(0x01): 0x00000002 status(0x02): 0x00000000
tx crc(0x01): 0x00000000 ctrl(0x06): 0x00008000

HWIC Cell Common Registers:
—————————-
hwic_cell_rev(0x1000): 0x10122010
intr1_enable(0x1020): 0x00000038 intr2_enable(0x1022): 0x0000007F
intr1_event(0x1020): 0x00000000 intr2_event(0x1022): 0x00000000

HWIC Cell SCC Registers:
—————————-
dma channel # = 0
ch_mode_cfg: 0x10019006 ch_flag_cfg: 0x00000000 ch_floctrl_cfg: 0x00000000
ch_int_enable: 0x0000EBFF ch_cmd_stat: 0x00000050 ch_int_stat: 0x001C (shadow)

dma channel # = 1
ch_mode_cfg: 0x10019005 ch_flag_cfg: 0x00001311 ch_floctrl_cfg: 0x00002200
ch_int_enable: 0x0000EBFF ch_cmd_stat: 0x00000050 ch_int_stat: 0x0001 (shadow)

dma channel # = 4
ch_mode_cfg: 0x10019034 ch_flag_cfg: 0x00000000 ch_floctrl_cfg: 0x00000000
ch_int_enable: 0x0000EBFF ch_cmd_stat: 0x00000050 ch_int_stat: 0x0001 (shadow)

HWIC Cell DMA Registers:
————————-
dma channel # = 0
Rx ring_start_ptr: 0x0E95AC00 Rx ring_mask_index: 0x01F80088
internal_desc_stat: 0x0800060C internal_buff_addr: 0x0EC38558
internal_context: 0x00000013 internal_fifo_data: 0x0EC38CC8

dma channel # = 1
Rx ring_start_ptr: 0x0E95EC00 Rx ring_mask_index: 0x01F80050
internal_desc_stat: 0x08000C00 internal_buff_addr: 0x0ED1B858
internal_context: 0x00000013 internal_fifo_data: 0x0ED19170

dma channel # = 4
Rx ring_start_ptr: 0x0E95CD80 Rx ring_mask_index: 0x00F80050
internal_desc_stat: 0x0800060C internal_buff_addr: 0x0ED76F58
internal_context: 0x00000013 internal_fifo_data: 0x0EECAE58

dma channel # = 0
Tx ring_start_ptr: 0x0E95CC00 Tx ring_mask_index: 0x00F80020
internal_desc_stat: 0x0CC00000 internal_buff_addr: 0x0DDB4990
internal_context: 0x00000401 internal_fifo_data: 0x006D355F

dma channel # = 1
Tx ring_start_ptr: 0x0E960880 Tx ring_mask_index: 0x03F80298
internal_desc_stat: 0x0CC00000 internal_buff_addr: 0x0DDB4990
internal_context: 0x00000181 internal_fifo_data: 0x006D355F

dma channel # = 4
Tx ring_start_ptr: 0x0E960D00 Tx ring_mask_index: 0x00F80000
internal_desc_stat: 0x0CC00000 internal_buff_addr: 0x0DDB4990
internal_context: 0x00000001 internal_fifo_data: 0x006D355F

idb at 0x2B2F5E00, driver data structure at 0x322A811C
0 input aborts on receiving flag sequence
0 throttles, 0 enables
0 overruns, 0 CRC errors
0 resource errors, 0 incomp frame errors
0 input drops
0 transmitter underruns
0 tx_abort 0 tx_reset
Framer Mode: Async-HDLC
Polling: Enabled

dma channel = 0

dma channel initialized.
Receive Ring
rxr head (17)(0x0E95AC88), rxr tail (17)(0x0E95AC88)
Transmit Ring
txr head (4)(0x0E95CC20), txr tail (4)(0x0E95CC20)

dma channel = 1

dma channel initialized.
Receive Ring
rxr head (10)(0x0E95EC50), rxr tail (10)(0x0E95EC50)
throttle flag = 0, throttle val = (0x00000000)
rx outstanding count = 12
2506 packet inputs
0 input aborts on receiving flag sequence
0 throttles
0 input errors, 0 overruns
0 input resource errors, 0 input drops
0 input frame errors
467 packet outputs
0 transmitter underruns
0 transmitter output drops
3 transmitter max tx outstanding packets
Transmit Ring
txr head (83)(0x0E960B18), txr tail (83)(0x0E960B18)

dma channel = 4

dma channel initialized.
Receive Ring
rxr head (10)(0x0E95CDD0), rxr tail (10)(0x0E95CDD0)
42 packet inputs
0 input aborts on receiving flag sequence
0 throttles
0 input errors, 0 overruns
0 input resource errors, 0 input drops
0 input frame errors
25 packet outputs
0 transmitter underruns
0 transmitter output drops
1 transmitter max tx outstanding packets
Transmit Ring
txr head (0)(0x0E960D00), txr tail (0)(0x0E960D00)

Firmware buffer pools
Egress buf pool 0x2048E3C size 16 alloc 11 redzone 0x204D888
0 no buffer 7 bad buffers refcount
Ingress buf pool 0x20493F4 size 16 alloc 12
0 no buffer
FIFO Queue Statistics
ch0: egress enabled 484 throttles 484 enables0 ingress overrun
ch1: egress enabled 467 throttles 467 enables0 ingress overrun
ch2: egress enabled 0 throttles 0 enables0 ingress overrun
ch3: egress enabled 0 throttles 0 enables0 ingress overrun
ch4: egress enabled 25 throttles 25 enables0 ingress overrun
ch5: egress enabled 0 throttles 0 enables0 ingress overrun

EHCI USB Controller Registers
Command 0x00010031
Status 0x0000E008
Interrupt Enable 0x00000035
Frame Index 0x000014BA
Control DS segment 0x00000000
Periodic List Base 0x0205F000
Async List Base 0x02064E60
Config Flag 0x00000001
Port Status 0x0000100D

Transfer Completion Codes
Success : 3696 CRC : 0 Bit Stuff:0
Stall : 0 No Response: 0 Overrun :0
Underrun : 0 Other : 0
Buffer Overrun: 0 Buf Underun: 0

Transfer Errors
Control Timeout : 0 Canceled Transfers : 0
Transfer Failures
Bulk Transfer : 0 Interrupt Transfer : 0
Control Transfer: 0 Isochronous Transfer: 0
Transfer Successes
Bulk Transfer : 3661 Interrupt Transfer : 35
Control Transfer: 0 Isochronous Transfer: 0